DIOXSAN Chlorine Dioxide KIT 100ml
Sodium Chlorite NaClO2 (25%) 100ml + Activator Hydrochloric Acid HCL (4%) 100ml
Classic 2 component kit for the production of chlorine dioxide / CDS for simple and safe drinking water disinfection.
The kit consists of sodium chlorite NaClO2 (25%) and the activator hydrochloric acid HCL (4%) filled in high quality amber glass bottles of 100ml each + 2 HDPE pipettes.
All components are of the same quality and strength as the original formulation.
This product requires activation before use. It has an unactivated shelf life of at least 2 years and is particularly suitable for travel and emergencies.
Safety Data Sheet NaClO2
Safety Data Sheet HCL
Chlorine dioxide is one of the most effective and safest biocides in the control of bacteria, viruses, parasites, fungi, algae, legionella and microbes.
It has the ability to dissolve existing biofilms.
The effect is based on the natural process of oxidation.
Chlorine dioxide decomposes into salt and water after the reaction and is therefore considered biodegradable.
For our DIOXSAN products we use only the best German and EU quality products.
For activation, mix sodium chlorite with activator hydrochloric acid in the same ratio:
Measure the components 1:1 with the provided pipettes and pour them into a clean vessel (e.g. small glass).
Wait approx. 45 seconds until the components have reacted.
An amber liquid is formed - the vapors must not be inhaled!
Mix the solution with the water to be treated and wait approx. 30 minutes before using the disinfected water.
Never use the mixture undiluted!
Do not use metallic vessels!
Do not inhale vapors and provide sufficient ventilation!
CAUTION Use biocidal products with care!
Always read the label and instructions for use before use!
Store out of reach of children!
Disinfection of drinking water:
To disinfect 1 liter of water, use 1-2 activated drops (equivalent to 1-2 drops of sodium chlorite + 1-2 drops of hydrochloric acid) of DIOXSAN Chlorine Dioxide KIT, depending on the degree of contamination of the water.
The water should be as free as possible from suspended matter and be at ambient temperature.
Shock disinfection of containers and drinking water systems:
For shock disinfection, use approx. 2 - 10 activated drops (equivalent to 2-10 drops of sodium chlorite + 2-10 drops of hydrochloric acid) of DIOXSAN Chlorine Dioxide KIT per 1 liter of water with an exposure time of 1 - 3 h.